Unpacking; Parts List, Installation - Bosch AUTODOME 7000 Guía Rápida

10 en | Unpacking
2

Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative. Refer to
Customer Support and Service, for contact information.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
2.1

Parts List, Installation

The following table lists the parts included in the shipping box for pendant models of
AUTODOME 7000.
Pendant Mount
Quantity
1
1
4
The following table lists the optional parts, sold separately, that you may need for attaching a
Pendant to the Arm Wall, Corner, or Mast mount packages.
Mounting Options
Pendant Arm (Only)
Pendant Arm with Mounting Plate
(24 V VG5 models only, no power supply box)
Pendant Arm with one of the following Power Supply Boxes:
–
–
Power Supply Box and cover with 120 VAC transformer
or with 230 VAC transformer
Trim Skirt for Power Supply Box (optional)
Bosch High PoE 60W midspan
Corner Mount Kit
–
Mast (Pole) Mount Kit
–
–
2015.03 | 2.0 | F.01U.312.043
Item
AUTODOME 7000 Pendant camera with clear acrylic bubble and sunshield
Quick Guide
MAC address labels
Power Box without transformer (24 VAC)
Power Box with 120 VAC transformer
or with 230 VAC transformer
Corner Mount Plate
Mast Mount Plate
Fiber Optic Ethernet Media Converter Kit
Quick Guide
AUTODOME 7000
Part Numbers
VGA-PEND-ARM
VGA-PEND-WPLATE
VG4-A-PA0
VG4-A-PA1
VG4-A-PA2
VG4-A-PSU1
VG4-A-PSU2
VG4-A-TSKIRT
NPD-6001A
VG4-A-9542
VG4-A-9541
VG4-SFPSCKT
Bosch Security Systems