Technical Specification; Ordering Information - Risco WatchIN Serie Instrucciones De Instalación

Technical Specification

Electrical
Current consumption (Relay Mode)
Current consumption (BUS Mode)
Voltage requirements
Alarm contacts
AM contacts
Physical
Size:
LxWxD
Weight
Environmental
RF immunity
Operating/Storage temperature
*Power to be supplied dy 5A max. power source using safety approved wires, with a min Gauge of 20AWG

Ordering Information

Standard Units
Part Number
RK325DT0000A
RK325DT00UKA
RK325DT00FRA
Each of the detectors contains a standard swivel and a replacement barrier lens (P/N engraved
on the Lens - RL327B)
Accessories
Part Number
RA300B00000A
RA300P00000A
RA300C00000A
RA300SC0000A
RA300HS0000A
Camera Accessories
Part Number
RA300VC0001A
RA300VC017NA
RA300VC053NA
RA300VC053PA
RA300VC017PA
RA300VPS100A
RA300VPS200A
16
45mA at 12 VDC (Stand by)
60mA at 12 VDC (MAX with LED ON)
30mA at 12 VDC (Stand by),
45mA at 12 VDC (MAX with LED ON)
9-16 VDC*
30 VDC, 1A
24 VDC, 0.1A
215 x 95 x 85mm
(8.5" x 3.75" x 3.35")
0.632 Kg (1.4lb)
40V/m (30MHz to 2GHz)
-30°C to 60°C (-22°F to 140°F)
Description
WatchIN DT 10.525GHz + Swivel
WatchIN DT 10.587GHz + Swivel
WatchIN DT 9.9GHz + Swivel
Description
Barrier Swivel Kit
Pole Adaptor Kit
Conduit Adaptor Kit
Swivel Metal Conduit Adaptor
WatchIN Demo
Description
Camera Cover Adaptor 1
NTSC Narrow Camera For WatchIN
NTSC Wide Camera For WatchIN
PAL Wide Camera kit
PAL Narrow Camera kit
220V PAL Camera Power supply
120V Camera Power supply
WatchIN Installation Manual
Weight
0.1 Kg (0.23 lb)
0.25 Kg (0.55 lb)
0.6 Kg (1.27 lb)
1Kg (2.2 lb
- -