BABYTREND ST28C20A Manual De Instrucciones página 3

ASSEMBLY
IMPORTANT!
To ensure safe operation of your product, please
follow these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT!
Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges. NEVER
use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
TO UNFOLD STROLLER
WARNING:
must be taken when unfolding
the stroller to prevent finger
entrapment. Before unfolding
the stroller, make sure that
the luggage handle is pressed
completely in (Page 13).
CAUTION:
Do not
allow children near stroller
while unfolding.
Unfold stroller as described in the section
following:
1) • To unfold the stroller push the small safety
lock and squeeze the large center button
while pulling upward on the stroller handle
until the frame locks (Fig. 1).
3
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Care
Fig. 1
FRONT WHEELS
To attach the front wheels, unfold stroller as
described in the following section:
2) • Lean the stroller backwards and push each
front wheel assembly into the front wheel
housing until they lock into place (Fig. 2a).
Repeat for the other side.
NOTE: Pull on the wheel assembly to ensure
that it is securely attached to the stroller
(Fig. 2b).
REAR WHEELS
3) • Lean the stroller forward and press the rear
wheel post into the rear frame hub until it clicks
into place (Fig. 3a). Repeat for the other side.
NOTE: Pull on the rear wheel to ensure that it
is securely attached to the stroller (Fig. 3b).
CANOPY
4) • To open the canopy: push forward on the
front edge of the canopy while holding the rear
of canopy in place
(Fig. 4).
• To fold the canopy: pull backwards on the
front edge (Fig. 4).
"Click"
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 2a
Fig. 2b
Fig. 3a
Fig. 3b
optional
visor
4
Fig. 4