Sauder 412093 Manual Del Usuario página 12

Step 8
Fill the holes in the LEFT END (E3) 1/4 to 1/2 full with GLUE (54M).
å
Be sure to fi ll the second and fourth holes from the rounded edge
as shown in the lower diagram.
Fasten the LEFT END (E3) to the FRONT PANELS (G3 and H3)
å
and BACK PANEL (I3). Tighten four HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the PANELS insert into the
å
holes in the LEFT END. Wipe away the excess glue.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
L e f
t E n
d
E3
E3
Rounded edge
Page 12
I3
Rounded edge
Roller end
Roller end
G3
H3
54M
412093
Maximum
Arrow
210 degrees
Minimum
190 degrees
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/services