Kobalt F226VWLVP El Manual Del Propietario página 7

Daily Start-Up Procedures
1. Set the Power Switch to the Off position.
2. Check the air compressor visually for any damage
or obstruction.
3. Close the drain valve.
4. Connect the air hose to the quick connect socket on
the regulator assembly by inserting the quick connect
plug on the air hose into the quick connect socket.
The quick connect socket collar will snap forward and lock
the plug into place providing an air tight seal
between the socket and plug. To release the air hose
push the collar back on the quick connect socket.
5. Plug the power cord into the proper receptacle.
4
Close
7
3
6. Turn the Power Switch to the On-Auto position and the
compressor will start and build air pressure in the tank
to cut-out pressure and then shut off automatically.
7. Adjust the regulator to a PSI setting that is needed for
your application and be sure it is within the safety
standards required to perform the task. If using a
pneumatic tool, the manufacturer should have
recommendations in the manual for that particular
tool on operating PSI settings.
NOTE: Always wear ANSI Z87.1 approved safety glasses
with side shields when the air compressor is in use.
Never point any nozzle or sprayer toward any part of
the body or at other people or animals.
Always wear the proper hearing protection.
5
5
1
6