Dovre 2175CBS Instrucciones De Instalacion Y Uso página 41

Cast-iron inner plates go a long way if you
frequently remove the ash that may pile up
behind them. If accumulated ash behind a
cast-iron plate is not removed, the plate cannot
dissipate the heat anymore to its surroundings
and that may cause the plate to warp or crack.
Never use the appliance without the fire-
resistant inner plates.
Dismantling damper and baffle
plate
Both the damper and the baffle plate can be removed.
The damper (A) is connected to the baffle plate by the
damper rod. The baffle plate is fastened to the
appliance with a bolt connection; see next figure.
1. Lift the damper (A) and remove the damper rod (B)
from the damper. Tilt the damper backward; see
next figure.
Subject to change because of technical improvements
2. The damper is now loose. Take the damper out of
the appliance; see next figure.
3. To remove the baffle plate, first unscrew the bolt
(C). Loosen the nut; see next figure.
4. Lift the baffle plate on the front side, pull the baffle
plate forward and slide the baffle plate off the bolt;
see next figure.
15