B-510Fl - Optika Italy B-510 Serie Manual De Instrucciones

7.7.3 B-510FL

1. Using the provided Allen wrenches, remove
the lamp housing from the illuminator using the
tightening screws ①.(Fig. 15)
2. Insert the lamp housing extension tube and
tighten the screws ②. (Fig. 16)
3. Reassemble the lamp housing and tighten the
screws ①. (Fig. 17)
4. Insert the round dovetail socket of the illuminator
③ into the hole in the microscope body and
tighten the locking screw ④. (Fig 18).
①
②
①
Page 23
Fig. 15
Fig. 16
Fig. 17
③
④
Fig. 18