Countertop Requirements; Installation Procedure; Prepare Installation Space - Gaggenau VL 040 714 Instrucciones De Instalación

Countertop Requirements

,
WARNING:
To reduce the risk of ignition of
surrounding combustible materials, install at
least 1¼" (30 mm) from both sidewalls and at
least 2" (50 mm) from the rear wall.
The countertop must be level and horizontal. The
stability of the countertop must be maintained after
the cut-out has been made.
¡
 PP
[
ƒ
  PP
µ
PLQ 
µ
 PP

µ
  PP
PLQ 
µ
 PP
4
¡
 PP
PLQ 
µ
 PP
PLQ 
µ
 PP
PLQ 
 PP
PLQ 
µ
 PP
  PP
 µ
 PP
µ

Installation Procedure

Prepare Installation Space

Create the cut-out in the countertop for one or several
Vario appliances according to the installation diagram.
The angle of of the cut surface to the countertop must
be 90°.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat-resistant manner.
Some solid surface countertops require special
installations. For example, heat reflective tape and
rounded corners may be necessary. Contact the
countertop manufacturer for instructions specific to
your countertop.
Observe minimum distance between appliance
underside and furniture parts of
When installing multiple Vario appliances:
account space requirement for VV 200 connection
strip between the appliances. Appliances can also be
installed in individual cut-outs, bearing in mind a
minimum distance between the appliances of 1
(40 mm).

3 / " (10 mm).
8
Take into
9 / "
16