Loading Paper in the Front Tray
You can load A4, Letter, or B5-sized plain paper in the Front Tray. You cannot load any other paper in
the Front Tray.
1
Open the Front Tray.
2
Extend the Output Tray Extension.
3
Set the Paper Thickness Lever to the left.
4
Load the paper in the Front Tray with
the print side facing DOWN and the
leading edge to the far side.
Do not load higher than the Load Limit Mark
(A).
5
Align the right edge of the paper stack
against the inner face of the Front Tray,
and the near and left edges with the
Paper Size Mark.
6
Pinch the Paper Guide and slide it until
it lightly touches the left side of the
loaded paper stack.
Important
If the Paper Guide is pressed too firmly against
the side of the loaded paper, the paper may bend
and not feed properly.
7
In the printer driver, select Front Tray for Paper Source.
All manuals and user guides at all-guides.com
3
(A)
4
6
Loading Printing Paper
1
2
5
9