Abicor Binzel ABITIG MT Instructivo De Servicio página 24

3 Product Description
Type of voltage
DC polarity of the electrodes
Type of use
Voltage rating
Max. arc ignition and stabilization voltage 12 kV
Protection type of the machine side
connections (EN 60 529)
Shielding gas (DIN EN ISO 14175)
Electrode
Required cooling unit capacity
Tab. 3
Type Type of
cooling
®
ABITIG MT
260W liquid
200 air
300W liquid
400W liquid
500W liquid
Tab. 4 Product-specific torch data (EN 60 974-7)
*According to EN 60 974-7 the value for alternating current (AC) must be given at 70% of the
tested direct current value (DC). All data refer to 4 m hose assemblies. For any further
information regarding the available hose assembly designs and performance data, please refer
to the order documentation.
EN - 6
General torch data (EN 60 974-7)
Load ED Electrode

DC AC*
A A % mm
260 180 100 1,0 - 3.2
200 140 60 1.6 - 4.0
300 210 100 1.6 - 4.8
400 280 100 1.6 - 4.8
500 350 100 1.6 - 6.4
DC or AC
Usually negative
automatic
141 V peak value
IP2X
Argon
commercially available tungsten
electrodes suitable for TIG use,
preferably low-radiation
800 W
Gas Cooling
flow
Max. supply
temp.
l/min °C
7 - 20 50
7 - 20
7 - 20 50
7 - 20 50
8 - 22 50
BAL.0107 • 2020-04-15
®
ABITIG MT
Torch inlet
pressure
Min. min. max.
flow
l/min bar bar
0.7 2.5 3.5
0.7 2.5 3.5
0.7 2.5 3.5
0.7 2.5 3.5