Setting The Non-Interference Or Privacy Feature; Talk Range; Programmable Button Options - Motorola DTR720 Guia Del Usuario

English
To change the group Profile ID number, refer to the
Advanced Settings on page
Setting the Non-Interference or Privacy
Feature
This feature ensures improved private communications by
configuring an appropriate PROFILE ID number.
IMPORTANT:
By default, the PROFILE ID number is "0000".
Ensure that all your radios are configured with the
same PROFILE ID number and is easy to
remember.
The Profile ID feature is enabled through Customer
Programming Software (CPS) configuration.
1 Press Menu/OK → Advanced → PROFILE ID.
2 Enter a four-digit radio PROFILE ID number.

Talk Range

Talk range is the distance or the communication range of
radios. Key considerations that affect range are: signal
type, antenna, and obstructions. You can communicate
28
43.
with a radio or a group of radios with the same
configuration.
Table 12: Talk Range
Model Steel or Con-
crete Industrial
Buildings
ISM 900 MHz Up to 350,000
ft²

Programmable Button Options

The Programmable button comes pre-programmed with
the Private Reply feature.
By using Customer Programming Software (CPS) or the
Advanced Settings of your radio, you can also configure
the Programmable button to allow other call features, such
as Page All Available, Call All Available, Direct Call, and
Mute. You can also configure the button to disable these
options.
For more details on how to configure the Programmable
Button, refer to Configuring the Programmable Button on
page 44 or Customer Programming Software (CPS) on
page 58.
Multi-Level
Buildings
Up to 30 floors