Cloning Profile Id Number Through Wireless - Motorola DTR720 Guia Del Usuario

English
NOTICE:
This cloning cable is designed to operate only
with compatible Motorola Solutions SUC.
When ordering Cloning Cable Kit, please refer to P/N#
HKKN4028_. For more information about the accessories,
see .
Cloning PROFILE ID Number Through
Wireless
The PROFILE ID Number Wireless Cloning feature is
useful when you want to clone the PROFILE ID Number for
all the radios in your fleet but you do not want to clone
particular radio settings that may be unique for each radio
(like Programmable button configuration, Microphone
Gain, Radio Name and others). It is also useful if you do
not have a programming cable, or PC available to use with
the Customer Programming Software (CPS) configuration.
The Profile ID feature is enabled through CPS
configuration.
1 Power the Target Radio and perform the following
actions:
50
a Press the Menu/OK → Advanced → Cloning →
Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
2 Power the Master Radio and perform the following
actions:.
a Press the Menu/OK → Advanced → Cloning →
Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
c Press the Menu/OK button.
The display shows Profile ID Cloning...
If successful:
• The display shows Cloned Successfully.
If unsuccessful:
• The display shows Cloning Failed.