Motorola DTR720 Guia Del Usuario página 64

English
If... Then...
Hearing conver- If you hear conversations from other
sation from oth- users that do not belong to your ra-
er users that are dio fleet, it means that your radios
not within your are set up with the same Profile ID
channel as your neighbors.
Likely both of you have the radios
set to the default PROFILE ID Num-
ber "0000".
Customize your PROFILE ID with a
4-digit number for all your radios.
Hearing crack- Sometimes users inadvertently
ing noises when press the radio PTT button against
nobody is talk- objects while wearing the radio on
ing their belts or pockets. When they do
this, the radio starts transmitting
and holding the channel therefore
generating strange noises. Using
earpieces reduce the likelihood of
this happening.
Ensure that everybody in your team
is aware of proper operation of the
radios.
64
If... Then...
Audio quality Radio settings might not be match-
not good ing up correctly. Double check to
enough ensure that the radio settings are
identical in all radios.
Go into Advanced Settings and ad-
just the microphone sensitivity gain
(MIC Gain).
For more information, refer to
vanced Settings on page
Audio sounds Digital technology gives you the ad-
garbled/robotic vantage to experience clear audio
up to the edge of the range. Howev-
er, when maximum transmission
range has been reached, audio may
sound garbled just before the trans-
mission is lost completely. To avoid
this problem, ensure that you are
within transmission range.
Transmit audio Hold the radio vertically 1 inch to 2
is low inches from mouth when talking.
Ad-
43.