Troubleshooting; Technical Specifications - cecotec Conga DuoStick Easy Manual De Instrucciones

• Brush the filter or clean it with lukewarm water without detergent or similar products. Let it dry
completely (for at least 24 hours) before putting it back in place.
CLEANING OF THE FELT'S:
• The felts must be cleaned at least twice a year or whenever you find accumulated dirt
that has started solidifying.
• Always use the vacuum cleaner with the felts in place. Otherwise, it can lose suction
power or the engine might get damaged.
• Make sure that you unplug the appliance before cleaning the felts.
• Gently brush the felts so as not to damage them by using cleaning paper or a cloth.
Remove all the accumulated dirt.

5. TROUBLESHOOTING

TROUBLE
Lack of suction.
The engine does not
work.
Overheating of the
body.

6. TECHNICAL SPECIFICATIONS

Model: Conga DuoStick Easy
Product reference: 05096
Rated power: 600 W
Maximum Power: 800 W
CAUSE
Excess of dust on the filter.
Full dirt container.
Blocked tube.
The plug is not connected to
the mains supply.
Slight temperature rising on
the accessible surfaces of the
device is normal during use.
In case of higher temperature
rise, check that the device
suction nozzles and opening
of the device are not blocked.
Clean dust filter.
Empty the dirt container.
Remove any element that
obstruct the passage of
Connect the plug to a socket.
Check all openings of the device
and remove obstacles that block
and prevent air circulation. If the
problem persists, Let it cool down
for 30 min.
Voltage and frequency: 220-240 V, 50/60 Hz
Suction power ≥17 kPa and noise level ≤80 dB
Cable length: 4,9 m
Dirt container capacity: more than 1 l
ENGLISH
SOLUTION
air.
CONGA DUOSTICK EASY 15