Wiring For 10/100Mbps (Fiber Optical/Copper) - Longshine LCS-SW2402S Manual Del Usuario

Wiring for 10/100Mbps (Fiber Optical/Copper)

Following are the summaries of cabling required:
Media
10/100Mbps copper
10/100Mbps
Fiber SC
Attention 1. Category 5 cable is preferred to use with this product in
structured wiring environments. This will ensure correct
operation of RJ-45 ports at 10Mbps, 100Mbps or 1000Mbps.
2. The proprietary management bus ("STACK" RJ-45 ports) on
the front panel is reserved for management stacking, only
straight-through UTP/STP cable can be used. There is no
Duplex Mode issue and the extended distance can up to 800
meters.
Speed Wiring
10Mbps Category 3,4,5 UTP/STP
100Mbps Category 5 UTP/STP
10/100Mbps 62.5/125 or 50/125µm
multi-mode fiber optic
E-11