Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Configuration
Port attributes can be setup in this page.
Setup Port Attributes
1.
Click the "Name" column of the port. Enter a name for identification, like
'Richard'; and press Enter
2.
Leave the "Admin" column 'Enable' value to make the port to be in operation
or 'Disable' to pause it
3.
Select Duplex mode---10Half/10Full; 100Half/100Full, 'Auto' for
auto-negotiation and 1000Full auto-detection
4.
Select 'Enable' to take "Flow Control" effect
5.
Select the predefined "Bandwidth Control" scale (10%~100%)
6.
Click Apply button to apply settings
Note
Also accomplished by simply mouse right-click the port on the 'Panel Display'
then select 'Configuration', the configuration screen pops up
E-34
Publicidad
Tabla de contenido
