To Remove A Vlan Group; To Modify A Vlan Group - Longshine LCS-SW2402S Manual Del Usuario

To remove a VLAN group

1. Select a VLAN group you want to remove from the "Current" list
2. Click Remove>> button to remove it
Attention 1. If a removed port is no longer belong to any other group, it is
temporarily disabled because no one can communicate with
it.
2. If one port's PVID is equal to this VLAN ID, removing this
VLAN group will not allow until you change it.

To modify a VLAN group

1. Select a VLAN group you want to modify from the current list
2. Modify parameters in "New" column
3. Click Modify button to submit the new parameters
VLAN Static Table
This screen is used to Add/Remove member ports of a VLAN.
Egress Ports/Member
The ports that have been added to the displayed VLAN group
Tagged Ports/Member
The tagged ports of the displayed VLAN group
E-40