Configuration - Longshine LCS-SW2402S Manual Del Usuario

Configuration

Usage
Priority
(1~65535)
Hello Time
(1~10sec)
Maximum
Age
(6~40sec)
Forward
Delay
(4~30sec)
Enable/Disable this switch to join in/withdraw from a
STA compliant network
Priority is a decisive key for selecting root device, root
port, and designated port. The smaller number, the higher
priority. The device with the highest priority becomes the
STA root device. However, if all devices have the same
priority, the device with the lowest MAC address will
become the root device
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying to
become so, in units of a second. This is the actual value
that this bridge is currently using
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of a second. This is the
actual value that this bridge is currently using
This time value, measured in units of a second,
controls how fast a port changes its spanning state
when moving towards the Forwarding state. The
value determines how long the port stays in each of
the Listening and Learning states, which precede the
Forwarding state. This value is also used, when a
topology change has been detected and is underway,
to age all dynamic entries in the Forwarding Database
E-48