Bernina Q 20 Instrucciones De Montaje página 14

English
13
Position the right leg (C) onto the back and base supports by aligning the
camlocks and wooden dowels with their corresponding holes.
15
Position the legs and supports upright and press together.
17
In preparation for attaching the top, position the top box lid over the leg
set to protect the top surface during assembly. Covering the box with a
blanket will further protect the surface.
14
C
14
Press the legs and supports together.
16
Tighten all camlocks (U) on the back supports to the right leg.
18
Position the top with the base facing up. Lift the top by holding the base
frame only and not the top extension surface.
U