User Maintenance - Andis PM-10 Guía De Inicio Rápida

using the appliance safely without supervision or
instruction by a responsible person to ensure that
they can use the appliance safely. Children should
be supervised by the responsible person to
ensure that they do not play with the appliance.
14. This unit is intended for household usage only.
15. Do not use this device in a bathtub, shower,
or water-illed reservoir.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS INTENDED FOR TRIMMING PURPOSES ONLY
OPERATING INSTRUCTIONS
Before starting the clipper remove the blade guard. Plug the cord into an
electrical outlet, operate at electrical current as noted on the unit. To start the
clipper move the switch button forward, to stop, move the switch button back to
the original position. After using your Andis clipper, rewrap the cord and store in
a safe place.
CLIPPER BLADE ADJUSTMENT
The blades on your Andis clipper can be adjusted to any one of four settings
from shorter to longer. To adjust blades, simply move the adjustment lever with
your thumb (Figures A & B).
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs
made for your Andis clipper. You can attach a comb to the blade in any one of
the four positions. The combs mount easily; simply slip the cutter blade teeth
into comb and snap the comb down. To remove, simply snap off (Figures C & D).
These attachment combs guide hair into the blades and give you precise control
of hair lengths. The length of trim is indicated on the attachment comb. Use the
chart to find the approximate lengths of cut. Different blade angles in relation to
the skin, thickness and texture of the hair will vary the cutting length.

USER MAINTENANCE

Cleaning and user maintenance shall not be made
by children without supervision.
4
B
A
ADJUSTMENT
ADJUSTMENT
LEVER
LEVER
SET FOR
SET FOR
LONGEST
SHORTEST
CUTS
CUTS
D
E
SNAP!
CLIPPING GUIDE
Description Clipping Direction
With hair grain
Standard Andis Blade
Against hair grain
With hair grain
1/8" Attachment Comb
Against hair grain
With hair grain
1/4" Attachment Comb
Against hair grain
With hair grain
3/8" Attachment Comb
Against hair grain
With hair grain
1/2" Attachment Comb
Against hair grain
C
F
OIL
Approximate Length of Cut
Blade set to Blade set to
shortest cut longest cut
1/16" (1.6 mm) 3/16" (4.8 mm)
1/32" (0.8 mm) 1/8" (3.2 mm)
1/4" (6.4 mm) 3/8" (9.5 mm)
1/8" (3.2 mm) 1/4" (6.4 mm)
3/8" (9.5 mm) 1/2" (12.7 mm)
1/4" (6.4 mm) 3/8" (9.5 mm)
1/2" (12.7 mm) 5/8" (15.9 mm)
3/8" (9.5 mm) 1/2" (12.7 mm)
5/8" (15.9 mm) 7/8" (22.2 mm)
1/2" (12.7 mm) 5/8" (15.9 mm)
5