cecotec HYDROBOOST 10200 LIBERTY PRO Manual De Instrucoes página 39

Operation
Note: The air inside the hose must be drained
every time the device is used. Hold the device
below the waist (<1.5 m) and then select high
mode. The water will be suctioned with the
hose and will be ejected. This process takes
about 15 seconds.
Select the water-spray effect
The water-spray effect (multi-angle nozzle)
must be selected according to the working
conditions. The 0º, 15º and 40º modes are
suitable for cleaning and watering.
Do not use turbid, muddy or corrosive water.
Warning
Other
The device can also be used with other
accessories.
Fig. 11
Fig. 12
Fig. 13
HYDROBOOST 10200 LIBERTY PRO
ENGLISH
39