Cleaning And Maintenance - cecotec HYDROBOOST 10200 LIBERTY PRO Manual De Instrucoes

ENGLISH
Do not turn the water supply off before turning the motor off. Serious damage could occur.
Tips for extending the product's service life
Never operate unit without water.
Do not use the device with hot water.
Before adjusting the pulverisingng nozzle's pressure (high-to-low or low-to-high) reléase
trigger.
Accessories:
3D TurboFlip nozzle
A turbo nozzle, sometimes referred to as a rotary nozzle, is a very effective accessory that
can significantly reduce cleaning time. It will generate a water steam that optimizes cleaning.
360 brush
This model includes a special brush for cleaning car wheels, which is made of hard bristles
capable of removing the most difficult dirt. When this accessory is installed and used, water
will automatically come out with low pressure, spray mode.
EasyClean brush
This model also includes a cleaning brush that, combined with water and soap, help removing
stains and allow a more efficient cleaning. When this accessory is installed and used, water
will automatically come out with low pressure in spray mode.
Anti-impurities filter
This model includes a transparent male connector with an anti-scale filter to which the hose is
connected, preventing scale from building up.

5. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
Maintenance of the water filter
Remove the transparent cover of the filter, then remove the dirt in the filter and rinse the parts
with water. Put the transparent cover back.
Cleaning and preservation
Remove the water inlet and the hose before storing it. Pour out the water inside the device and
43
HYDROBOOST 10200 LIBERTY PRO