Installation Checklist; Complete The Installation - Sub-Zero ICB424 Instrucciones De Instalación

Installation Checklist

Complete the Installation

For overlay and flush inset applications, follow these steps
to complete the installation. Before installing the kickplate,
be sure to reinstall the drain pan. Once the drain pan is in
place, screw the kickplate the to brackets attached to the
inside surface of each roller base. Reinstall the grille fol-
lowing the instructions on page 13. Turn power back on to
the electrical outlet.
Installation Checklist
The importance of the installation of the Sub-Zero wine
storage unit cannot be overemphasized. Proper installa-
tion is the responsibility of the selling dealer or installer.
IMPORTANT NOTE: To ensure a safe and proper installa-
tion, the following checklist should be completed by the
installer to ensure that no part of the installation has been
overlooked.
Any questions or problems regarding the installation
should be directed to your Sub-Zero dealer.
INSTALLATION CHECKLIST
Has the packing material been removed?
Turn the unit on. Is it operating properly?
If not, is the unit plugged in? Is the control turned on?
Have the anti-tip brackets been installed securely and
properly engaging the unit?
Is the unit leveled properly on a solid, level floor?
Is the kickplate installed?
Has the drain pan been installed properly
(model ICBWS-30)?
Are panels attached securely and properly aligned?
Has the door been aligned for proper appearance and
operation?
Has the unit been properly anchored to the opening?
Does the 90° door stop need to be installed?
Does your customer understand the unit's operation?
Have any installation or service problems been noted
on the product registration card? Has the registration
card been mailed in?
Has the stainless steel door been inspected for any
imperfections? This is to be done by the dealer or
installer with the customer upon completion of the
installation.
27
subzero.com