Peavey TRANSCHORU S210 Guía De Operación página 3

Congratulations on your purchase of the Peavey TransChorus
combines PeaveyÕs patented TransTube
design. If you havenÕt played through a Peavey TransTube
¨
Transtube technology produces a tone so similar to tubes that itÕs deceiving to even the most
experienced ears. PeaveyÕs chorus amps have been top sellers for years, offering an array
of chorus sounds varying from a slight hint to a heavy swirl.
Other features found on the TransChorus
amp, two sets of equalization, and PeaveyÕs T. Dynamics
compact 210 cabinet, and you have one very portable and versatile combo-amp capable of answer-
ing various playing demands. We know you are anxious to start playing, so weÕve included a ÒQuick
StartÓ section and a ÒRecommended SettingsÓ section. These are certain to get you on your way.
However, it is important that you read the safety precautions first. Scan through this manual and
locate these safety icons:
Each safety icon is followed by a warning. Read that warning carefully before continuing on. Once
you have read all of the warnings, refer to the ÒQuick StartÓ section below if you so desire. It is
recommended that you read this manual in its entirety to fully understand the functions of each
feature.
The following section takes a Òjump in and get your feet wetÓ approach. If any part seems
confusing, refer to the more detailed sections that follow.
Step 1. Insure that you have read and understand all safety warnings noted throughout the
manual. It is imperative that you follow these precautions for the safety of yourself and your amp.
Step 2. With the amp turned off plug the power cord into the proper voltage supply indicated
on the back of the unit near the cord retainer.
Step 3. Plug your guitar into either the High or Low Gain input and turn all knobs counter clockwise
to their Ò0Ó position.
Step 4. Using the ÒRecommended SettingsÓ on page 7, find the type of tone that most closely
resembles the tone you wish to obtain.
Step 5. Set the knobs on the front of the unit to match the setting you have selected.
Step 6. Plug your footswitch into the Remote Switch jack on the rear of the unit.
Step 7. Turn your guitar volume down and turn the amp on using the power switch on the back of
the unit.
Step 8. Gradually turn the volume of your guitar all the way up or until you are comfortable with
the level/tone.
ENGLISH
TransChorus
¨ tube emulation with the latest developments in chorus
ª 210 are reverb, three distinct channels, stereo power
Quick Start Ñ I just want to play!
3
ª 210
ª 210. The TransChorus
¨ amp you are in for a real treat.
¨
power amp circuitry. Pack all that into a
ª 210