Jacuzzi Cloud 100*80 Manual De Instalación página 7

m
The building's electrical system and ground system
must be efficient and must conform to legal regula-
tions and specific national standards.
m
Where required, appropriate devices must be provid-
ed, which form part of the fixed system, and installed
in compliance with current legislation in force, with
the purpose of disconnecting the appliance from the
mains.
n For connection to the electric mains, you will need to install
an isolating multi-pole switch, which will ensure complete dis-
connection in the instance of a category III over voltage; these
devices must be connected to an area that complies with the
safety regulations governing bathroom safety.
m 
Switches and electrical devices, according to regula-
tions, must be connected to areas out of the user's
reach.
n The installation of electrical devices and equipment (sockets,
switches, etc.) in the bathroom must be in compliance with legal
standards and regulations in the country where the appliance is
installed.
n To connect the building's electrical system, you must use a
cable protected with a sheath with characteristics not inferior to
H 05 VV-F 3x2.5 mm
2 .
m The building's electrical supply must be equipped
with a differential switch with operating current
which does not exceed 30 mA.
n   In the case where the building's electrical system
is not able to provide a constant power supply, we
recommend installing a voltage regulator, suitable
to provide the required power, before installing the
appliance.
n Cloud shower enclosures have a terminal identified by the
symbol , placed on the back of the frame for equipotential
connection of the surrounding metal masses (standard EN
60335.2.105).
n The appliance is equipped with an LED lighting system in
compliance with Norm EN 62471:2009, lamp classification
group: exempt.
Do not look directly at the light using optical devices (bin-
oculars, cameras, magnifying glasses).
m 
ATTENTION! Before carrying out any maintenance
operation, disconnect the appliance from the power
supply line.
JACUZZI EUROPE S.p.A. denies all responsibility:
- If installation is carried out by unqualified personnel and/or per-
sonnel unauthorised to carry out the installation itself.
- If current norms and legal provisions regarding the electric sys-
tems of buildings in the country in which installation is carried out
are not complied with.
- If the instructions for installation and maintenance contained in
this manual are not followed.
- If unsuitable and/or uncertified materials are used for installation.
- If shower enclosures are placed in areas which do not comply with
the above-quoted standards.
- If incorrect operations are performed that reduce the level of pro-
tection of the electrical equipment against water jets, modify the
protection against electrocution due to direct or indirect contact,
or produce abnormal conditions of insulation, current leakage or
overheating.
- If any components or parts of the appliance are altered in rela-
tion to the original state when supplied, releasing the Manufacturer
from any liability.
- If the appliance is repaired by unauthorised personnel or if spare
parts are used other than the original ones supplied by Jacuzzi Eu-
rope S.p.A.
7 7