Promax 26 Manual De Instrucciones página 106

In order to modify the modulation, press the
means of the navigation buttons [7] or the alphanumeric keyboard [10] it will be possible
to change this value. The valid values are: QAM8, QAM16, QAM32, QAM64 and QPSK.
In order to modify the signal symbol rate press the
means of the navigation buttons [7] or the alphanumeric keyboard [10] modify its value.
The valid values are: 160, 320, 640, 1280, 2560 and 5120.
Page 42
Figure 33.- Power level configuration.
Figure 34.- Modulation mode configuration.
USER'S MANUAL. PROMAX-26
MOD. [F5] key and, later by
SR. [F5] key and by
02/2007