Modem Mode - Promax 26 Manual De Instrucciones

USER'S MANUAL. PROMAX-26
2. CONFIG. MODE:
3. TV MODE:

4. MODEM MODE:

5. GENERATOR MODE: Output settings for signals generated when instrument works in
To access any of the various operation modes from the main menu (see fig 3)
press the appropriate programmable key [13], according to the lower selection box.
Figure 3. - Main menu, lower selection box and programmable keys. (SOFTKEYS).
To access the main menu from any screen, simply press the direct access
key [13]. Some modes feature over a page of information. To return to the page of
origin, press the BACK key.
02/2007
The CONFIG operation mode allows users to set the basic
working parameters of the cable TV / Data analyser: Active
channel plans, emitted Power, CMAC Code, PING address,
registered or unregistered mode, frequency and mode of
noise measurement, etc.
The TV operation mode offers the functions to analyse the
analogue and digital video carriers being possible to
demodulate the audio carrier. By means of the logger function
the signals detected on the channel plan are automatically
stored.
This mode allows to verify a DOCSIS/EuroDOCSIS data
transmission system behaviour previously configurated through
the CONFIG mode. It works for upstream as well as
downstream data links and also permits to store the data
obtained into a logger and to view the Constellation Diagram
graph for digital QAM modulations.
return path.
Page 17