Specifications - Promax 26 Manual De Instrucciones

USER'S MANUAL. PROMAX-26
In the design of the PROMAX-26 special care has been taken to create a
practical, accurate, yet easy-to-use device. A simple alphanumeric keypad incorporating
soft-keys facilitates direct access to the various operating modes. Once accessed,
ambidextrous navigation and selection keys can be used to easily modify any
parameter of the measurements.
Additionally, it has an RS-232 interface for connection to a printer or computer
to generate reports on the measurements performed, as well as one ETHERNET
connector that allows the instrument control trough a PC connected to a local network
and the access to a WEB SERVER.
The instrument is powered by means of an internal rechargeable battery.
The integration of all of these functions in a device that weights less than 1.5 kg,
with ergonomic, robust design, make the PROMAX-26 an unbeatable fieldwork tool.
1.2

Specifications

TUNING
Tuning range
MODEM mode
Tuning mode
Channel plan
Resolution
Indication
Channel frequency offset
GENERATOR
Carriers frecuency range
Resolution
Accuracy
Carrier level
Signal level resolution
Signal level accuracy
BROADBAND POWER
LEVEL MEASUREMENT
Measuring range
Bandwidth
Resolution
Accuracy
02/2007
From to 862Hz.
From 53 to 855 MHz
By channels or by frequency.
10 channel plans, each one with a maximum of 140
channels. Factory start-up channel plans:
CCIR, EIA, HRC, IRC, OIRL, UK, AUNAD, ST2L,
AUST, ONO.
10 kHz.
Graphic LCD with automatic back lighting.
± 2,5 MHz.
5 — 50 MHz
10 kHz
< ± 5 kHz
60 to 110 dBµV (selectable in 1 dB steps)
1 dB
2 dB
From 70 to 120 dBµV (From 10 dBmV to 60 dBmV
From 5 to 1000 MHz
1 dB
± 3 dB (From 5 to 40 °C)
(1)
).
Page 3