USER'S MANUAL. PROMAX-26
Una vez activada la tecla STORE [F1], seleccionar el nombre con el cual se
almacenarán las medidas (p.e.: LOGGER01) y a continuación pulsar la tecla SAVE
[F4] para activar el proceso de captura automática de medidas (ver la siguiente figura).
Figure 29.- Data acquisition. DATALOGGER.
The selection box contains the functions that can be performed over the logger
indicated on the upper line: DEL [F2], VIEW [F3] or PRINT [F4].
To access the different loggers stored, press the navigation buttons [7] until the
selection arrow is over the logger number to be accessed.
To return to the TV measurement functions menu, press the BACK [F1] option
from the lower selection box.
To delete the measurements stored in a logger, select the DELETE [F2] option.
A message to confirm the erasing procedure will appear on screen.
To view the measurements stored in a logger select the VIEW [F3] option:
02/2007
Page 39