Oakley ELITE FULL METAL JACKET Manual Del Usuario página 7

10 OAKLEY FULL METAL JACKET INSTRUCTION MANUAL
™
MOUNTING THE MODULE
The timekeeping module can be transferred
between the wristwatch chassis and the chassis
on the pocket watch chain.
TO TRANSFER THE MODULE
1. Open the cam lever on the chassis.
2. Lift the module out of the chassis where it is
currently mounted (It may be necessary to push
the module out from the back side. When doing
so, push it out squarely and evenly, and be careful
not to allow the module to fall to the ground).
3. Place the module into the chassis where it will
be mounted. Be sure it is fully and squarely
seated in place.
OAKLEY FULL METAL JACKET INSTRUCTION MANUAL
™
MOUNTING THE MODULE - CON'T
4. Close the cam lever, and be sure it clicks
fully into the closed position. If there is a
NOTABLE AMOUNT OF RESISTANCE when
closing the cam lever that holds the module,
do not attempt to force the cam lever closed.
Open the cam lever and check to ensure the
module is fully and squarely seated in place
before attempting to close the cam lever again.
11