Oakley ELITE FULL METAL JACKET Manual Del Usuario página 8

12 OAKLEY FULL METAL JACKET INSTRUCTION MANUAL
™
BAND ADJUSTMENT
If links need to be added or removed from the metal bracelet, the adjustment should be done by an
Authorized Oakley Timepiece Dealer. Do not attempt to shorten the bracelet by removing links yourself,
as this may result in damage to the bracelet. The included screwdriver is for use by Authorized Dealers
only. If the bracelet needs to be shortened, bring the screwdriver with the timepiece when you visit
an Authorized Dealer.
CLEANING
Failure to keep the case and bracelet clean may result in a skin rash. Use a soft, clean cloth to wipe
off any moisture that adheres to the case or bracelet.
COMPOSITION
CASE BODY .....................................................................................................................Impact-forged titanium
CASE BACK ............................................................... Titanium screw-in design with sapphire crystal inlays
MANUFACTURING ......................................... High-precision Computer Numeric Control (CNC) machining
CRYSTAL .................................................................................................Sapphire with anti-reflective coating
CROWN ............................................................................. Locking screw-down design for water resistance
BRACELET COMPOSITION ..................................................................................................................... Titanium
POCKET WATCH ACCESSORY COMPOSITION ................................................................................... Titanium
SPECIFICATIONS
MOVEMENT ............................Swiss Made, 25-jewel, auto mechanical, ETA7750 Valjoux, COSC Certified
BALANCE FREQUENCY ....................................................................................28,800 vibrations per hour; 4 Hz
ACCURACY ..................................................................................................... +/-12 seconds per day (average)
WATER RESISTANCE ....................................................................10 bar; equivalent to depth of 100m / 330ft
RESERVE RUNNING TIME ....................................................................................................... Approx. 46 hours
WATER EXPOSURE
Prior to exposing the timepiece to water, ensure the crown is pushed fully down against the case then
turn it clockwise to tighten the water seal. (Be careful not to over tighten the crown, as this will damage
the mechanism.) Rated at 10-bar hydrophobic, the timepiece may be worn during bathing, swimming and
shallow diving. It is not designed for scuba or saturation diving. Do not pull out the crown or use the buttons
if the timepiece is wet. If used in seawater, rinse the timepiece with fresh water and dry completely.
TEMPERATURE
For precision timekeeping, normal operating temperature is 0°C to 50°C (32°F to 122°F).
MAGNETISM
Strong magnetic fields can have an adverse effect on the timepiece. Keep it away from magnetic objects.
CHEMICALS
The timepiece may become discolored or damaged if exposed to cosmetic spray, detergents,
adhesives, solvents, or paints.
SHOCK WAVE
Although the timepiece resists shock damage, impact against a hard surface may cause damage to
the movement or crystal.
PERIODIC MAINTENANCE
To ensure that the case, crown, crystal seal, and gasket remain resistant to water exposure, it is
recommended that the timepiece be inspected once every two to three years by an Authorized Oakley
Service Center.
OAKLEY FULL METAL JACKET INSTRUCTION MANUAL
™
SPECIFICATIONS - CON'T
SAFEGUARDING
13