Connecting The Receiver To The Mains Power Supply - SOMFY HOME MOTION ROLLIXO RTS Manual De Instalación

Rollixo RTS

Connecting the receiver to the mains power supply

[1]. Fully unfold the receiver aerial so that it is pointing downwards.
[2]. Screw the bulb supplied into the receiver.
[3]. Replace and screw in the receiver cover.
[4]. Refit the integrated lighting bulb.
[5]. Connect the receiver to the mains power supply .
All the indicator lights come on and then go out.
If indicator light 1 comes on permanently, fall protection is not connected or incorrectly
connected to the receiver.
If indicator light 2 comes on permanently, the safety edge has not been detected by the
receiver (radio safety edge transmitter not yet memorised or the wired safety edge is still
not connected).
6
1 2 3 4
Prog
STOP
Copyright © 2012 Somfy SAS. All rights reserved