SOUNDMASTER highline UR2006 Manual De Instrucciones página 18

2.13 AOT Function

Press <AOT> once to review the current sleep timer. The radio will turn ON, if the radio has not
been activated.

Press <AOT> again the change the current setting down to the nearest multiple of 5 minutes within
120-5 min.

Press <AOT> when the current setting is 5 min, 'OFF' goes solid which implies the sleep is cancel,
and radio will be keep ON
2.14 Radio Power On/Off

Press <On/Off> once, power on the radio and the station frequency show on LCD.

Press <On/Off> again, power off the radio and return to Auto Run Mode
2.15 Radio reception

Press <On/Off> once, the station frequency show on LCD.

Press <Up> once to change the receiving frequency up by 1 step.

Press <Down> once to change the receiving frequency down by 1 step.

Press and hold <Up> to search the next radio station by moving the receiving frequency up.

Press and hold <Down> to search the next radio station by moving the receiving frequency down
2.16 Recall radio preset memory

There are 30 preset memory stations for the radio

When the radio is ON, press <Preset +> or <Preset -> to select the memory. 'MEM' goes solid; the
frequency of the memory goes solid in the LCD.

When new preset memory is selected, MUTE is active. When keying the preset memory has been
released for 1 second, the selection of preset memory is considered as valid and the radio will be
tuned to that frequency immediately with MUTE idle.

At any time, press other key to start its corresponding function.
2.17 Store into memory

There are 30 preset memory stations for the radio
 Press <Memory> once, the 'MEM' goes flash. Press < Preset +> or <Preset -> to select the desired
preset memory station, press <Memory> again to store the frequency.

When new preset memory key is pressed, MUTE is active. When keying the preset memory has
been released for 1 second, the selection of preset memory is considered as valid and the radio will
be tuned to that frequency immediately with MUTE idle.

At any time, press other key to start its corresponding function.
2.18 AMS Using

When radio is On.

Press and hold <AMS> for 2 seconds to active AMS mode.

In this mode, the radio will automatically scan the radio station and store the station that had been
scanned until scan up all the frequency or stored all the memory station, it will exit automatically.
ENGLISH
GB 6
.
.