Set The Clock - SOUNDMASTER highline UR2006 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
2. How to Use
As the unit is powered up, the date and clock are defaulted to Wensday, 1
12:00AM
The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled
The radio is switched off.
It then switches to auto-run mode
When unit is powered up first time, RCC will be active automatically and volume grade icon flashing
on LCD, When the signal has been received and decoded successfully ,the real time clock is
updated and volume grade icon solid, press other key to start its corresponding function.
2.1 Auto-run Mode (Radio OFF)
Press <Mode> once to set up different mode sequentially
Press <Alarm-1> to review/set the alarm-1
Press <Alarm-2> to review/set the alarm-2
Only when the radio is ON, press <Preset +>, or < Preset -> to recall the preset memories.
Only when the radio is ON, press <Memory>, < Preset +> or <Preset -> and then <Memory > again
to store the current station into memory.
Only when the radio is ON, press <Vol. +> and <Vol. -> to adjust speaker volume
At every minute boundary, the real time clock is compared with the alarm setting if it has been
enabled. For details, please refer to the section of 'When alarm is active'
Note: The device will active RCC for synchronization in background for time update at the
1:01& 3:01& 5:01 everyday.

2.2 Set the clock

Press <Mode> once when the unit stays in clock display mode
The clock goes flashing the LCD
The second keeps counting up once per second
Press <Up> to advance the clock by 1 minute
Press <Down> to move the clock back by 1 minute
Press and hold <Up> or <Down> to set the clock in fast mode of 10 minutes per step
Press <Mode> once to set the date.
Press other key to start its corresponding function.
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode
ENGLISH
Auto-run Mode (Display showed Clock )
Set the Clock
Set the Date
Dimmer Select(Hi/Lo)
Set SDA
Clock Format Selection (12/24 Hours)
GB 2
st
Jan 2014, 0:00 or

Publicidad

Tabla de contenido
loading

Tabla de contenido