SOMFY V300 Guía De Instalación Y Uso página 115

V300
Mark
17
18
19
20
3.2.2 Door station
The door station can be connected to a gate motorisation and an electric latch/lock (maximum 12 V AC/DC - 800 mA).
The gate and the electric latch/lock can be activated independently via the videophone monitor, see "5.1.1 Connecting to a Somfy
gate motorisation" and "5.1.2 Connecting to an electric latch/lock".
30
45
Mark
1 Rain shield
2 Camera
3 IR LED lighting
4 Microphone
5 Speaker
Back-lit name plate
6
Back-lit call button
Speaker volume adjustment
7
potentiometer
Call signal adjustment
8
potentiometer
9 Terminal block
10 Anti-tamper screw
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.
Description
Enables you to go back to a previous screen in the settings menu.
BACK button Enables a screen shot to be taken during a conversation with a visitor.
Enables the monitor bell-tone to be selected by keeping the button depressed.
Switch for 1 or 2
Enables the installation to be set for one or two residences.
residences
Enables the monitor to be connected to the power supply, the door station and
Terminal
the additional monitor if it is installed.
Allows the bell to be heard when activated as well as the voice of the visitor
Speaker
standing in front of the door station.
4
3
2
6
5
76
70
Description
Protects the camera from the rain and sun.
Films the visitor and sends the image to the monitor.
Enables visitors to be seen at night.
Enables the visitor to speak to the person indoors.
Enables the visitor to hear the person indoors.
Indicates your name on a label.
Visitors can use this button to ring the bell on the monitor. The camera and the
monitor screen are switched on.
Used to adjust the volume of the door station speaker.
Used to adjust the volume of the call signal emitted by the door station
speaker.
Used to connect the monitor station to a gate motorisation or an electric latch/
lock.
Stops the door station from being opened without the Torx key provided .
1
9
8
7
10
Description
Description
EN
6-1
6-2
5