Kit Assembly - Metra 95-7522B Instrucciones De Instalación

ISO DDIN radio provision
1. Install the (4) included panel clips
to the back of the Radio Housing.
Note: The factory clips removed in
disassembly can also be used if so
desired.
2. Attach the Radio Brackets to
the Radio Housing with (4) #8 x
3/8" Phillips truss head screws
supplied. (Figure A)
3. Slide the radio into the completed
assembly and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
95-7522B
(Figure B)
3