Kit Assembly - Metra 95-6532B Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the (4) white panel clips
provided with this kit to the Radio
Housing. (Figure A)
2. Attach the radio brackets to the
aftermarket radio using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS.
4. Reconnect the negative battery terminal
and test the aftermarket radio for proper
operation.
5. Mount the radio into the dash using the
factory screws and slip the radio trim panel,
provided with this kit, to the radio face.
6. Reassemble the dash in the reverse of
the dash disassembly to complete the
installation.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 2/2/22 INST95-6532B
3