Kit Assembly - Metra 95-8246HG Instrucciones De Instalación

Double DIN radio provision
1. Attach the factory panel clips to the
radio housing trim panel.
2. Attach the brackets to the radio housing
trim panel using (4) of the supplied #8 x
3/8" screws. (Figure A)
3. Slide the radio into the bracket/radio
housing assembly and secure to the
assembly using the screws supplied
with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative battery
terminal and test the unit for proper
operation.
5. Reassemble dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 3/24/2022 INST95-8246HG
3