TEFAL ClipsoMinut Perfect Guia Del Usuario página 35

Cooking with
"Pressure Cooking"
Turn the operating valve (A) to the cooking with "Pressure Cooking" position
- fig 9.
Make sure your pressure cooker is properly closed before use
Place your pressure cooker on a heat source then set to maximum power.
For models equipped with a cook control*: programme the cooking time
indicated on the recipe (see section "Using the cook control").
Jingles and fumaroles emitted from the pressure indicator are normal, they
allow the escape of air before cooking.
During cooking with "Pressure Cooking"
When the operating valve (A) is constantly leaking steam, making a regular
sound (PSCHHHT), lower the heat source.
Count the cooking time indicated in the recipe.
During cooking, check that the valve murmurs regularly. If there is not
enough steam being released, increase the heat source slightly; if there is
too much steam, reduce it.
End of cooking with "Pressure Cooking"
To release the steam:
When the heat source has been turned off, you have two options:
•
Gradual release: steadily turn the operating valve (A) selecting your chosen
decompression speed to finish opposite the pictogram mark
®
ClipsoMinut'
Perfect and
Easy models
®
ClipsoMinut'
Duo model
* depending on model
EN
- Fig. 3.
- fig 10.
31