Before Using Your New Induction Hob; Technical Specification; Operation Of Product; Touch Controls - EAS ELECTRIC EMIH600-FX Manual De Instrucciones

2.4 Before using your New Induction Hob

 Read this guide, taking special note of the 'Safety Warnings' section.
 Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.

3. Operation of Product

3.1 Touch Controls

 The controls respond to touch, so you don't need to apply any pressure.
 Use the ball of your finger, not its tip.
 You will hear a beep each time a touch is registered.
 Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
V. 1
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
EMIH600-FX
4 Zones
220-240V~ 50/60Hz
7200W
590X520X60
560X490
EN-9