Before Using Your New Induction Hob; Technical Specification; Operation Of Product; Touch Controls - EAS ELECTRIC EMIH290-3S Manual De Instrucciones

2.4 Before using your New Induction Hob

•
Read this guide, taking special note of the 'Safety Warnings' section.
•
Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice

3. Operation of Product

3.1 Touch Controls

•
The controls respond to touch, so you don't need to apply any pressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.

3.2 Choosing the right Cookware

Only use cookware with a base suitable for induction cooking.
•
Look for the induction symbol on the packaging or on the bottom
of the pan.
• You can check whether your cookware is suitable by carrying out a magnet test.
Move a magnet towards the base of the pan. If it is attracted, the pan is suitable
for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
• Cookware made from the following materials is not suitable: pure stainless steel, aluminium or copper
without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.
EMIH290-3S
3 Zones
220-240V~ 50Hz or 60Hz
6600W
590X520X62
560X490
10
V.2