Before Using Your New Induction Hob; Technical Specification; Operation Of Product; Touch Controls - EAS ELECTRIC EMIH600-FX1 Manual De Instrucciones

2.4 Before using your New Induction Hob

 Read this guide, taking special note of the 'Safety Warnings' section.
 Remove any protective film that may still be on your Induction hob.

2.5 Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products, we
may change specifications and designs without prior notice.

3. Operation of Product

3.1 Touch Controls

The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
EMIH600-FX1
4 Zones
220-240V~ 50
7200W
590X520X60
560X490
9
Hz or 60Hz
V.2