Astralpool 35450 Manual De Instalación Y Mantenimiento página 4

Proyector de leds subacuático para fuentes
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Once the unit is connected, proceed as follows to start-up the projector for the first time:
• Switch on the unit by activating the 230 Vac. at the input of the Receiver-Modulator, which will automatically syntonize with the
transformer. The green led of the Receiver-Modulator will flash every 2 seconds and the spotlight will remain off.
• Switching on the Remote control
o Keep the OFF key pressed of the Receiver-Modulator. The green led will flash quickly indicating that it is in the Instruction
mode.
o Switch on the Remote Control and press any button. If you have several Remote Controls, repeat the operation so that the
Receiver-Modulator acknowledges them all. There can be a maximum of eight.
5.2.2 Types of lighting
The Remote Control – Receiver/Modulator – Transformer – Led Projector unit enables you to create different lighting settings inside
the pool with two operation options:
Set colour: Selection of a set colour among twelve possibilities.
COLOUR Nº
1
2
3
4
5
6
7
8
9
10
11
12
Automatic sequence of colours: Selection of nine colour sequence programmes. Each programme is defined by the lighting time of
each colour and the transition time from one colour to another according to the following table:
For example, programme 5 indicates that each colour will stay for 30 seconds, out of which 22 seconds will be with one set colour
and the remaining 8 seconds are used in the transition to the following colour. Programme 8 indicates that the 60 seconds
corresponding to each colour are used in the transition to the following colour.
The colours used in the sequence can be selected from the 12 set colours. Proceed as follows to include them in the sequence:
• Press the COLOUR key in the remote control. The colour number will be displayed preceded by the letter "C".
• Press the ACTIVATION key and the letter "C" will alternately switch from an upper case letter to a lower case letter.
• The colours activated with the upper case "C" will form part of the sequence.
% RED
% BLUE
100
0
0
100
0
0
100
60
100
0
0
100
0
60
100
100
0
100
100
0
100
100
100
80
COLOUR TIMING
SEQUENCE
(SEC.)
1
2
3
15
4
15
5
30
6
30
7
60
8
60
9
120
% GREEN
0
0
100
0
60
60
100
0
100
100
80
100
BLENDING
TIMING (SEC.)
4
1
8
8
4
15
8
30
15
60
60
4
COLOUR
Red
Blue
Green
Magenta
Light yellow
Bluish cyan
Greenish cyan
Purple
Cyan
Yellow
Bluish white
Greenish white

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

35451

Tabla de contenido