Full Two-Year Warranty - Philips SmartSleep Instrucciones De Uso

28
English
Problem
The reset does
not work.

Full Two-Year Warranty

Possible cause
The long press was
too short.
The sensor is off.
The sensor is in a
sleep session '- -'.
Philips North America LLC (USA) and Philips
Electronics Ltd (Canada) warrant this new
product against defects in materials or
workmanship for a period of two years from
the date of purchase, and agree to repair or
replace any defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
Solution
Press and hold the
activation button for 5
seconds, until you see
the countdown (3-2-1)
on the display and feel a
vibration. Keep pressing
even when you see '- -
'on the display (after 2
seconds of long
pressing). The final
vibration indicates that
the reset was successful.
The adaptation phase is
now active again (see
'Resetting the sensor').
The long press (five
seconds) only works
when the display is
active and shows one of
the sensor data screens
(see 'Sensor data').