Functional Description; Sub-Assemblies Accessories En - Abicor Binzel BRS-LC Guia De Instalacion

BRS-LC
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for shipment and storage on page EN-6

5 Functional description

For cleaning, the torch is clamped with the cylindrical part of the gas nozzle in the clamping device. The
milling tool which is configured to the gas nozzle and torch geometry moves into the gas nozzle interior by
means of a stroke movement and removes adhering welding spatter. At the same time, the gas nozzle interior
is cleaned with compressed air blown through the cable assembly (option). Hereby, the cleaning process is
optimized in connection with an optional air-blast function.
1
2
3
4
Fig. 3
5.1 Sub-assemblies accessories
Prism Anti-twist fastening with cylinder head screw M8x20 in clamping device. (Available for all common gas
nozzles as a function of the gas nozzle diameter).
Milling tool The milling tool dimensions are determined based on the gas nozzle and torch geometry for an immersion
depth up to 50 mm. Available for all standard WH and robot torch versions.
Tab. 11 Accessories
7
6
5
4
3
Covering hood
Frame
Compressed-air motor
Guide block
Torch cleaning station sub-assembly BRS-LC
5 Functional description
1
2
5 Milling tool stroke 50 mm
6 Torch-specific prism
7 Clamping device
EN - 9