jbc RMSE-C Serie Manual De Usuario página 19

Tip Cleaner
Improve thermal transfer by cleaning the tip after each solder joint.
Brass wool
Ref. CL6210
Very effective cleaning
method. It leaves a small layer
of solder on the tip to prevent
oxidation between cleaning
and rewetting.
Splashguard
It prevents splashing of
solder particles when
using the brass wool.
Wiper
Ref. CL0236
A temperature resistant receptacle lets
the operator remove excess solder by
gentle tapping or wiping. It can be easily
removed for cleaning.
Optional
Inox wool
Ref. CL6205
Brushes
Ref. CL6220
w w w.jbctools.com
Sponge
Ref. S0354
The least harmful cleaning
method. Keep the sponge damp
with distilled water when working
to avoid tip wear.
Tapping:
Tap gently to remove
excess solder.
Tip-tinner
Ref. TT-A
Non-slip base
Heavy weighted non-
slip base for simple-
handed cleaning.
Wiping:
Use the slots to
remove remaining
particles.
Sand
Ref. CL6211
19