Powder Coated & Stainless Steel Restroom Partitions, Floor-Mounted with Overhead Brace — Series 400
8
Pilaster Shoes
A
Position pilaster shoe so that it rests flush with the floor .
Using the hole(s) in the shoe as a template, drill a Ø9/64"
B
pilot hole (through inside face of pilaster only) . Secure
the shoe to the pilaster using the #10 x 5/8" fastener(s)
provided .
18
3/21/2018
Bradley • HDWT-INSTR-009 Rev K; ECN 17-14-007
Installation