Lincoln Electric MAGNUM 100SG Manual Del Operacion página 12

A-6
MOUNTING THE SWITCH
15. Remove the plug button from the panel hole.
16. Plug button is no longer needed. Discard.
17, Remove mounting nut from switch. Keep mounting
nut for installation.
INSTALLATION
18. Install switch into panel hole. Ensure washer tab
is fully seated into smaller hole.
19. Reinstall mounting nut onto switch.
Wrench tighten.
RE-ASSEMBLE MACHINE AS FOLLOWS:
20. Reinstall screw into plastic handle (if so
equipped).
21. Reinstall cover.
22. Reinstall door.
23. Reconnect input power to the machine
MAGNUM 100SG SPOOL GUN
A-6