Door Removal - Haier HRF-663ISB2 Serie Manual De Instrucciones

Door removal

Removing the door
If your house door is too narrow, remove the refrigerator door and carry the
refrigerator in narrow side first.
Remove the toe moulding, and then
release the water coupler.
Slide the toe moulding up to remove it, and then release
the water coupler while pressing on area (1) as shown in
the illustration.
Remove the freezer compartment door.
1) Unscrew the hinge covers. Disconnect all
wires except for the grounding wire.
2) Remove the screws from the upper hinge
following the direction as indicated by Arrow (1).
Then remove the upper hinge following the
direction as indicated by Arrow (2).
3) Lift the freezer compartment door to remove
it. Next, lift the door enough to be able fully
pull out the water line.
10
Water coupler
Hinge cover
Upper
(hinge)
Lower
hinge
Toe moulding
Wires
Grounding wire
Upper hinge
Screw
Lift
Lift until water
line can be fully
removed.