How To Mount Lens - Panasonic GP-US932CSXE Manual Del Usuario

How to mount lens

Important:
• A lens whose projection length of the lens mount section is 4 mm or less shall be
used.
• The recommended lens aperture ranges from F2.2 to F16. Selection of less than F2.2
of the lens aperture may result in image blurring.
• When a zoom lens is used, focus adjustment method varies with the lens. For further
information, refer to the operating instructions for the lens to be used.
• When the lens is removed, be sure to put the cap on the lens mount section of the
camera head.
Step 1
Remove the cap from the lens mount section of the camera
head.
Important:
• Check to see whether the surface of the optical filter is
clean before mounting a lens. If the surface is dirty, use
a blower brush for general camera to remove dust.
Recommended lenses (As of September, 2012)
Manufacturer
FUJINON
FUJINON
FUJINON
FUJINON
FUJINON
FUJINON
Product name
High Definition Fixed Lens
High Definition Zoom Lens
3CCD Camera Lens
3CCD Camera Lens
3CCD Camera Lens
3CCD Camera Lens
Step 2
Turn a C-mount lens clockwise to engage the lens with the
lens mount section.
Model
HAF4.8DA-1
XA4x7.5DA-1
TF2.8DA-8
TF4DA-8
TF8DA-8B
TF15DA-8
C mount:
4 mm or less
15